1776 Armory LLC Copyright* 2024-2025 Contact us for fair use of all content on this website using our automated E-Mail

Sturm, Ruger & Co.

LC Charger Model Number 19303

AR-556 Model Number: 8515

Ruger® Rapid Deploy folding rear sight provides windage adjustability and pairs with the A2-style, F-height, elevation-adjustable front sight for a solid, reliable aiming system.Made from 7075-T6 hard-coat anodized aluminum forgings, shot-peened and proof-tested 9310 steel bolt, and 8620 steel bolt carrier. The inside diameter of the carrier and gas key are chrome plated and the key is staked for longevity.Barrel nut and delta ring allow easy, one-person service of the heat-resistant glass-filled nylon handguard. The design accepts most standard carbine-length handguards. The barrel nut uses a standard wrench.Gas block is located at a carbine-length (M4) position for improved balance and handling. Multiple attachment points include a QD socket and bayonet lug, for many sling and accessory mounting options. Serrations on the angled face of the gas block provide a low-glare surface.Magpul® MOE® M-LOK® handguard is made from heat-resistant glass-filled nylon for shooting comfort and durability.Single-stage trigger provides durable and reliable fire control. The enlarged trigger guard is designed to allow gloved shooting in cold weather.Six-position, telescoping, Magpul® MOE® Carbine buttstock and Mil-Spec buffer tube allow the rifle to be properly sized for different shooters or varying levels of outerwear.Equipped with a medium contour, cold hammer-forged alloy barrel with 1:8" twist rifling that provides exceptional accuracy with bullets from 35 to 77 grains. M4 feed ramps and 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. ammunition. The barrel and 1/2"-28 Ruger® flash suppressor have a matte black oxide finish to reduce glare and provide corrosion resistance.Front sight post is elevation adjustable, and a front sight tool is included. The A2-style, F-height front sight allows co-witness with many optics.Ergonomic pistol grip features an extended trigger reach for more precise trigger control.Made from aerospace-grade 7075-T6 aluminum forging, the flat top upper receiver features a forward assist, dust cover and brass deflector.Also includes: one, 30-round Magpul® PMAG® magazine.

If you want to see more firearms, Please Vist the Sturm, Ruger & Co. website. Find what you are looking for and EMAIL us what you want and we will send you OUR PRICING as a DEALER

The LC Charger is chambered in 5.7x28mm, a low-recoiling cartridge available in an exciting array of options for target shooting, small game and personal defense. This large format pistol utilizes the same steel magazines and familiar ergonomic controls as the Ruger-5.7® pistol.

LCP® MAX Model Number 13716

Compact and lightweight, the LCP® MAX continues to be the definitive pocket-sized personal protection pistol. Slide features raised cocking ears and functional serrations for easy manipulation. Standard 10-round magazine ships with flush floorplate installed. 12-round magazines available at ShopRuger.com.Textured grip frame provides a secure and comfortable grip. Utilizing the 12-round magazine, or included finger grip extension floorplate with the 10-round magazine, allows most shooters a full-firing grip.Slide and frame surfaces and edges are smooth for comfortable carry and handling.Tritium front sight with white outline makes for fast acquisition in all light conditions.Rear sight features a generous u-notch for easy alignment and a square front face for one-handed cocking. Sight dovetails are sized to accept aftermarket Bodyguard-pattern sights.Improved magazine feed lips, feed ramp, extractor, and barrel cam

Redhawk® Model Number 5044

Cold hammer-forged sleeve and shroud barrel provides outstanding accuracy.Unique, single-spring mechanism allows for a smooth, light trigger pull.Triple-locking cylinder is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation shot after shot. Easy sighting with readily replaceable colored front blade sight insert and adjustable rear sight with white outline. Rugged stainless steel construction with no side plates is designed specifically to handle powerful magnum loads through extra metal in the top strap, sidewalls and barrel mounting areas. Transfer bar mechanism provides an unparalleled measure of security against accidental discharge. .44 Magnum models are dual chambered to also accept factory .44 Special cartridges.

Ruger Precision® Rifle Model Number 18029

Medium-contour (.75" at the muzzle) barrel features a Ruger Precision Rifle Hybrid Muzzle Brake to effectively reduce recoil while minimizing noise and blast to the sides of the shooter. Patented multi-magazine interface functions interchangeably with AICS and M110/SR-25/DPMS/Magpul-style magazines (works with some M14 magazines). Ruger Marksman Adjustable™ trigger is externally adjustable, with a trigger pull range of 2.25 to 5 pounds; wrench is stored in the bolt shroud. In-line recoil path manages recoil directly from the rear of the receiver to the buttstock, not through a traditional bedding system, providing maximum accuracy potential. Ruger Precision MSR stock with QD sling attachment points features a bottom Picatinny rail and soft rubber buttpad. The left-folding stock hinge is attached to an AR-style buffer tube and accepts any AR-style stock. Length of pull and comb height are adjustable. Cold hammer-forged, chrome-moly steel barrel with 5R Rifling at minimum bore and groove dimensions, minimum headspace and centralized chamber. 15" aluminum free-float handguard is black hard-coat anodized aluminum and features Magpul® M-LOK® slots on all four sides for improved scope clearance for long-range scopes and easy mounting of M-LOK-compatible rails and accessories. Ambidextrous manual safety for left- or right-handed lever manipulation. 20 MOA Picatinny rail secured with # 8-40 screws for increased long-range elevation capabilities. "Upper" receiver and one-piece bolt are precision CNC-machined from pre-hardened chrome-moly steel to minimize distortion. Three-lug bolt with 70° throw features dual cocking cams and a smooth-running, full diameter bolt body. Bolt body is nitrided for corrosion resistance, smooth operation and durability. Barrel can be replaced easily by a competent gunsmith using headspace gauges. Magazine well front is contoured for a positive grip when bracing against shooting supports. Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement. Bolt disassembly tool is stored in the Ruger Precision Rifle Billet Aluminum Bolt Shroud for easy striker channel cleaning."Lower" magazine well halves are precision machined from aerospace-grade aluminum and are Type III hard-coat anodized for maximum durability. Extended trigger-reach AR-style grip and 45° ambidextrous safety selector. May be configured with any AR-style grip and selector.Also includes: two, 10-round Magpul PMAG® magazines.

SR1911 Model Number 6765
Limited Edition 75th Anniversary

Limited Edition 75th Anniversary model features a "R75" serial number prefix and is embellished with a laser engraved slide. Custom grip panels feature detailed scrollwork to match the engraved slide. Classic, original 1911 fire control. Precision CNC-controlled machining process results in a superior slide-to-frame fit and smooth slide travel. Positive barrel lock-up allows for superior accuracy out of the box. Traditional design with replaceable grip panels and checkered backstrap. Lightweight, aluminum, skeletonized trigger provides a very crisp, no creep, light trigger pull with a quick, positive reset. Skeletonized hammer and titanium firing pin for faster lock time. Oversized beavertail grip safety provides positive function and reliability. Extended thumb safety and slide stop lever for improved, positive manipulation. Integral plunger tube for slide stop and thumb safety is not staked and will never come loose. Oversized ejection port and extended magazine release enhance performance. Inspection port allows for visual confirmation of a loaded or empty chamber. Features a flat mainspring housing and rear slide serrations for a positive grip. Accepts most standard, aftermarket 1911 parts and accessories. Also includes: One 8-round stainless steel magazine and one 7-round stainless steel magazine; bushing wrench and specially marked lockable handgun case.

Ruger® Scout Rifle Model Number 6841

Forward-mounted Picatinny rail allows for the mounting of modern optics, like an intermediate eye relief scope (not included), for "both eyes open" sighting and rapid target acquisition.Built-in, accurate sighting system with adjustable ghost ring rear aperture sight and a non-glare, protected blade front sight. Detachable magazine with push-forward magazine release just forward of the trigger guard. Integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for included scope rings, eliminating a potential source of looseness and inaccuracy in the field.Soft-rubber buttpad with buttpad spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear (three, 1/2" spacers included).Free-floating, cold hammer-forged barrel results in ultra-precise rifling that provides exceptional accuracy and longevity. Rugged and reliable glass-reinforced nylon trigger guard and magazine well.Non-rotating, Mauser-type controlled round feed extractor is among the most positive case extraction systems ever invented, and features a fixed blade-type ejector that positively ejects the empty cases as the bolt is moved fully rearward. Lightweight synthetic stock models feature a forward aluminum bedding block and rear aluminum pillar that positively locate the receiver. Also includes: One steel magazine; rugged, one-piece, stainless steel bolt; three-position safety; sling swivel studs.